Skip to product information
1 of 3

DUAL Lead SMA Antenna Extension Cable for 4G/LTE/5G Modems and Routers -Cradlepoint, Pepwave, Others

DUAL Lead SMA Antenna Extension Cable for 4G/LTE/5G Modems and Routers -Cradlepoint, Pepwave, Others

SKU / Part Number:

SKU:

Regular price $0.00
Sale price $0.00 Regular price

Most orders ship the same day when ordered by noon EST. Do you have an urgent need? Contact us, we can accommodate you!

Cable side one (SMA Male x 2)
Cable side two (SMA Female x 2)

Use this extension cable to move your 4G/LTE/5G Modem or Router antenna to a better location to pick up the cell signal.

This is a DUAL Lead antenna extension cable for antennas that have two leads.  Instead of purchasing two separate extension cables (one for each lead), this DUAL Lead cable consists of two individual cable leads with their outer jackets bonded together to make one single cable.  This makes for a neater cable installation.

This cable assembly is configured as SMA Male on one end and SMA Female on the other.  It works as an extension cable.  It is compatible with all 4G and 5G antennas on the market that have an SMA connector.  For connecting external antennas that have N Female connectors, use this cable assembly instead.

This cable features a stranded copper center conductor which will not break under repeated motion and provides greater flexibility, a foam dielectric and double shielding for low signal loss and interference rejection, and a UV protected, Polyethylene jacket.

  • Lightweight, Flexible
  • Polyethylene Jacket, UV Protection
  • Stranded Center Conductor
  • 90% tinned copper braid, plus 100% aluminum foil shield

See spec sheet for cable dimensions and full attenuation ratings.

 


QUALITY AND PERFORMANCE: This cable is professionally assembled and tested in our manufacturing facility in Maryland, USA! We stand behind the quality and performance of our cables. Our cables are guaranteed to be of the highest quality and performance or your money back.

PRODUCTION DETAILS: You are purchasing a completed cable assembly with connectors professionally attached to the cable. The ends are soldered and crimped, heat shrink is applied to seal the cable to the connector and provide additional support and the cable is then tested to ensure proper assembly and performance.

We use Agilent N9912A RF Analyzers for cable sweep testing.

SAME DAY SHIPPING: These cables are built-to-order. We have an optimized production line for these assemblies so most orders will ship the same day!

RETURN POLICY:
Since these cables are built-to-order, they are not returnable if you make a mistake when choosing the connector types or length. To see pictures of connectors, please see the connector identifier link at the top of the website. If you need assistance, please contact us.

 

We're here to help!

  • Prefer to order by phone or have questions? Call us at 888-467-2258
  • Large order requirement or ongoing needs? Bulk discounts and credit terms are available.
  • Not enough of this item showing in stock? We have short lead times on most products!
  • Not exactly what you need? We specialize in custom work! Please ask!