JEFA Tech Low Loss 600 Cable Assembly

SKU: CA-600-C1-C2-1
  • $33.49

Prefer to order by phone or have questions? Call us at 888-467-2258

JEFA Tech Low Loss 600 is for installations where the lowest amount of signal loss is required. With a 0.59 inch diameter, Low Loss 600 is much larger and stiffer than 400, but it has the lowest signal loss rating of all of our cables and will give you the best performance. It features a solid center conductor for greatest performance, foam dielectric and double shielding for low signal loss and interference rejection, combined with a direct burial capable, UV resistant jacket.

  • 1/2" Low Loss Coaxial Cable
  • Polyethylene Jacket, UV Protection
  • Direct Burial Rated
  • Solid Center Conductor
  • 98% tinned copper braid, plus 100% aluminum foil shield
  • High Performance Connectors
  • Professionally Assembled and Tested
  • Connectors are shrink wrapped for durability

Attenuation (Signal Loss) per 100/ft (lower numbers are better)

Frequency LL100 LL195 LL400 LL600
30Mhz 3.93 1.98 0.67 0.43
50Mhz 5.09 2.56 0.88 0.55
150Mhz 8.96 4.45 1.52 0.98
220Mhz 10.91 5.39 1.86 1.19
450Mhz 15.82 7.77 2.71 1.71
900Mhz 22.83 11.13 3.90 2.50
1.5Ghz 30.08 14.54 5.12 3.32
2.5Ghz 39.81 19.02 6.77 4.42

See spec sheet for cable dimensions and full attenuation ratings.


QUALITY AND PERFORMANCE: This cable is professionally assembled and tested in our manufacturing facility in Maryland, USA! We stand behind the quality and performance of our cables. Our cables are guaranteed to be of the highest quality and performance or your money back.

PRODUCTION DETAILS: You are purchasing a completed cable assembly with connectors professionally attached to the cable. The ends are soldered and crimped, heat shrink is applied to seal the cable to the connector and provide additional support and the cable is then tested to ensure proper assembly and performance.

We use Agilent N9912A RF Analyzers for cable sweep testing.

SAME DAY SHIPPING: These cables are built-to-order. We have an optimized production line for these assemblies so most orders will ship the same day!

Since these cables are built-to-order, they are not returnable if you make a mistake when choosing the connector types or length. To see pictures of connectors, please see the connector identifier link at the top of the website. If you need assistance, please contact us.

We Also Recommend

Customer Reviews

Based on 1 review Write a review