Increase the power output and receive sensitivity of any 802.11b/g router, USB adapter, or wireless card. This will dramatically increase the wireless range of your existing equipment.
Easy installation. Remove the antenna from your existing wireless device (works with RP-SMA or RP-TNC antenna ports - other adapters are available). Connect the booster to the antenna port. Connect to 110V AC power with included power adapter.
Includes a 3dBi rubber duck antenna. You may also connect it to any antenna or coax cable leading to an exterior antenna using an RP-SMA connector.
- IEEE 802.11b/g compatible
- Increase the wireless signal throughput and signal range
- For use with equipment that has detachable antennas
- Easy installation - no software required
- Works with Access Points, Routers, PCI wireless cards, wireless USB adapters
- Connects to RP-SMA or RP-TNC antenna ports (other adapters available)
- Free carry bag
SPECIFICATIONS
|
Operating Mode
|
Bi-directional, half-duplex, time division duplex senses RF
carrier from transmitter and automatically switch receiving to
transmitting mode
|
|
Connector Type
|
Input: RP-SMA Male
Output: RP-SMA Female |
|
Transmit Gain
|
13~14 dB
|
|
RF Input Power |
0~15 dBm |
|
RF Output Power |
500mW (27 dBm at 15 dBm RF input power)
100mW (20 dBm at 6 dBm RF input power)
|
|
Receiver Gain
|
≦12 dB |
|
Noise Figure
|
3.5 dB typical |
IN STOCK
Part Number: JTIB-500
Retail Price: $89.95
Price Each: $49.95
)
